Completed CONNEX Junction connection showing adjustable socket
Completed CONNEX Junction connection showing adjustable socket
Completed CONNEX Junction connection showing adjustable socket
To fit, a hole is first drilled in the main pipe using a cordless drill and hole saw
The base of the coupler is then pushed through the hole and positioned with the seal seated against the pipe wall
The collar is fitted and then the locking ring is tightened
The adjustable socket is lubricated and fitted
The completed CONNEX Junction
The components of the CONNEX Junction
 
Installing the CONNEX Junction on HS® Pipe
 

CONNEX Junction Lateral Pipe Connection

Sewer saddle for creating a permanent connection to HS® pipes

The CONNEX Junction allows house connection lines or lateral pipes to be joined to the main sewer, on new or existing pipes. It features an integrated adjustable socket, which allows the connected pipe to move within a range of 0° to 11°.

The CONNEX Junction has been approved by the Water Research Council (WRC PT/358/1213) and has a long service life.

The use of the CONNEX Junction considerably simplifies conventional working methods. It is no longer necessary to expose a section of sewer, adjust the pipe bed and install Y-junctions and T-junctions with slip couplers after cutting the main pipeline. The precise and quick fitting junction system saves time and money.

The three versions of the CONNEX Junctions are:

  • 200mm bore with 200mm socket for the DN/OD 250 to 1500 nominal diameter range
  • 200mm bore with 160mm socket for the DN/OD 400 to 1500 nominal diameter range
  • 162mm bore with 160mm socket for the DN/OD 200 to 315 nominal diameter range

Find out more

For more information or to purchase this product, please contact our Technical Sales Manager David Williams:

Mobile icon 07392 080611

Phone icon 01722 716361

Email icon dave.williams@mjabbott.co.uk

Follow us on Facebook Follow us on Twitter See our videos on You Tube Find us on LinkedIn