HS® Pipe ready for shipping
HS® Pipe ready for shipping
HS® Pipe ready for shipping
HS® Pipe comes with chamfered spigots as standard in 1.5, 3 or 5 metre lengths
HS® Pipe with CONNEX Junction
HS® triple socket Y junction
HS® 45° double socket bend
HS® Pipe bespoke cutting and chamfering tool
Push fit sockets mean pipe jointing is easy
Just push the pipe into the socket up to the centre register
Pushing the pipe home against the centre register
Placing the pipe bedding after installation
Pipe data marked on the inside of the pipe as standard
HS® 30° double socket bend
HS® Pipe bespoke cutting and chamfering tool

HS® Pipe

Excellent technical properties and available from DN/OD 110 to DN/OD 800

The HS® drainage pipe system has excellent technical properties and is available from DN/OD 110 to DN/OD 800. Special components such as the VARIO coupler, the Demarcation and Control Chamber, a level lateral invert connection, a cleanout opening and diverse bends and branches contribute to the strong performance and diversity of use of this modern pipe system. The pipes are wall-reinforced solid wall PVC-U pipes in the colour brown.

They are manufactured as plain-ended pipes with chamfered spigots in DN/OD 110-315 and as single socket pipes in sizes DN/OD 400-800. The pipes are available in lengths of 1.5m, 3m and 5m. The moulded parts with a firmly inserted FE® seal are able to withstand heavy loads and can be used with coverings of between 0.5m and 6m for traffic loads of max HA 20. The measured ring stiffness amounts to ≥ 12 respectively 16kN per square metre. All of the moulded parts (SDR 34) are constructed so that they do not form any steps on the interior. The use of double socketed fittings enables the drainage pipe system to be installed easily.


  • All parts have a permanent engraving which enables important pipe-related data such as the manufacturer, nominal width and ring stiffness to be read years later
  • The pipes and moulded parts are pressure tight up to 2.5 bar so that they can also be used in water protection areas
  • All of the components in the HS® drainage pipe system are fitted with an oil-resistant red and black two-part seal which aids installation
  • The Demarcation and Control Chamber is small, telescopic and Class A/B or Class D, in accordance with the UK SFA 7 document
  • The HS® VARIO coupler has an integrated ball which allows connected pipes to pivot within a range of 0° to 11°

Find out more

For more information or to purchase this product, please contact our Technical Sales Manager David Williams:

Mobile icon 07392 080611

Phone icon 01722 716361

Email icon dave.williams@mjabbott.co.uk

Follow us on Facebook Follow us on Twitter See our videos on You Tube Find us on LinkedIn